Touring-Car-2016

From 2016 we have 2 types of chassis kit, the “T series chassis” and the “Tx series chassis”. The 2016 version “T series chassis” car - namely the T16 - is the exact follower of the T15, it is based on standard Zenoah engines. The “Tx series chassis” car - namely the Tx16 - is based on our all-new Beast engine.

T16-430-03 Tx16-430-03

To open the T16 specification page

<<< click here >>>

To open the Tx16 specification page

<<< click here >>>

 

The main differences between the “T series chassis” and the “Tx series chassis” are the main alloy chassis, the left and right side engine brackets, all in all three parts. Any RS5 Touring car from T12 (T12, T13, T14, T15, T16) can be converted to a Beast engine ready Tx series car.

T-series-430-01 Tx-series-430-01

T series chassis components
(compatible with any standard Zenoah engine)

Tx series chassis components
(compatible with our all-new Beast engine)

 


Beast-430-001 Tx-CK-430-07
To open the Beast engine specification page
<<< click here >>>
To open the Tx conversion kit specification page
<<< click here >>>

 

 

2016 all-new Touring car components and upgrades

 

TC-2016-430-05

All-in-one RC unit

 

The new 2016 version receiver box mounted on the servo tray, above servos.  It leads to a compact all-in-one RC unit that can be installed or removed easily. The receiver box is CNC machined and made of high quality plastic.

The All-in-one RC unit is standard on T16 and Tx16 cars and compatible with T14 and T15 cars as well.

To see the All-in-one RC unit components and kits

<<< click here >>>

 
TC-2016-430-06

New Top Decks

 

We redesigned the front and middle top decks, because of the new 2016 receiver box loll over the top deck plane. We created these new top decks for the T14 and for the T15 (same as the T16, Tx16) car.

The ordering codes for the T14 version:
12132 (T14 front) , 12152 (T14 middle)

The ordering codes for the T15 (same as the T16, Tx16) version are:
12133 (front) , 12153 (middle)

 
TC-2016-430-201

New Center Roll-Bar Front Wishbone

 

New 2016 version of front wishbone with center axis ball anti-roll bar. We moved the front anti-roll bar in the centerline of the wishbone, to reduce dynamic droop change during suspension movement.

The new front lower wishbone is standard on the T16 and Tx16 cars and compatible with the T15 car.

You can read more about the new front lower wishbone by

<<< clicking here >>>

TC-2016-430-408

New Rear upper wishbone brackets

 

The new 2016 version rear shock tower and upper wishbone bracket with oval plastic insert allow you to change the position of the rear upper wishbone up and down, by twisting or changing them. We have two types of inserts and with them you can change the height of the rear upper wishbone by 1,5mm.

The new rear upper wishbone brackets are standard on the T16 and Tx16 cars and compatible with T14 and T15 cars.

You can read more about the new rear upper wishbone brackets by

<<< clicking here >>>

TC-2016-430-09

New Front hubs

 

New 2016 version front wheel hubs with 4 different offset positions on the top. The back inside hole was the basic hole at the T15 and earlier cars. The holes are 6-6 mm offset from each other. The different offset has effect to the rear traction and the steering characteristic of the car. The hubs are made of 7075-T6 alloy and are CNC machined.

The new front hub is standard on the T16 and Tx16 cars and compatible with the T15 car.

The ordering codes are:
31115 – Left side
31116 – Right side

TC-2016-430-601
 

New Power Supply Tray

 

Our new carbon fiber Power Supply tray mainly designed for the Tx series car to support the Beast engine’s Ignition Coil, the battery and the transponder holder into an all-in-one unit. This tray is standard part on any Tx16 car and is an optional part for T16 car and for the Tx conversion kit.

You can read more about the Power supply tray and battery compatibility by

<<< clicking here >>>